Semi-solid industrial tyres and PU foam-filled tyres are puncture-proof that are suitable for severe-duty applications.

Tyres are the only connect between the vehicle and the terrain hence ensuring that tyres are reliable, safe, performance worthy anytime and every time, is critical specially for severe duty applications such as construction, industrial plant, mining, recycling, scrap handling etc. Besides, as tyres represent the highest operating cost after fuel, understanding tyre related global best practices & emerging concepts is essential.

We wish to introduce and explain to the readers contemporary puncture-proof tyres and technologies that reduce total cost of ownership (TCO) and cost per hour (CPH). Semi-solid industrial tyres

Developed specifically to address the problems of frequent punctures and fast wear encountered by industrial vehicles/equipment used in demanding service environments and difficult underfoot conditions.

These semi-solid tyres are airless thus puncture proof, have an extra deep tread for long, uninterrupted service, with specially designed sidewall apertures to provide shock absorption & ride comfort.

These are available in a range of patterns to suit various operating conditions and supplied as ready to fit tyre and wheel assemblies for easy replacement.

Product features & benefits:

• Puncture-proof
• Zero downtime
• High safety - no danger from blowouts
• Long life - 4-5 times that of pneumatic tyres.

Semi-solid tyres are suitable for industrial equipment with a maximum operating speed of 25 km/hr, such as:

• Aerial work platforms such as manlifts, boom lifts and scissor lifts
• Backhoe loaders
• Skidsteer loaders
• Telehandlers
• Wheel loaders

PU foam-filled tyres
Tyre filling is a process in which a pneumatic tyre is injected and pressurised with a special two-component urethane polymer in a precise proportion using a special metering pump. The polyurethane cures into a soft, resilient, synthetic rubber core replacing the air in the tyre.
The resultant filled tyre is thus rendered puncture proof and maintains the required pressure throughout its service life. PU Filled tyres have a full footprint and are capable of carrying their rated load at all times.
The soft core is designed to provide a ride similar to air filled pneumatic tyres.

Product features & benefits:

• Puncture-proof & maintenance-free
• Enhanced man & machine safety
• Better ballast in overload conditions
• Extended limp-in capability
• Suitable for vehicles with a maximum operating speed of 90 km/hr and industrial equipment for which semi-solid tyres are not available.

Typical applications:

• Access equipment
• Defence & paramilitary
• Port & harbour
• Open cast mining & quarrying
• Steel mills
• Underground mining

Semi-solid tyres and PU-filled tyres offer the following long term benefits:

• Zero tyre maintenance: No punctures and elimination of periodic tyre pressure checks
• Lower operating costs: Direct puncture costs and puncture-related costs such as machine downtime, operator idle time and operational delays are automatically eliminated. While semi-solid tyres cost about three times the price of pneumatic tyres, it is important to note that they are puncture-proof and their life is four to five times that of pneumatic tyres thus offer a lower CPH.
• User & equipment safety: Semi-solid tyres/PU-filled tyres significantly improve occupational safety as there is no possibility of tyre blowout-related accidents
• Maintenance of operational tempo: The elimination of punctures allows sustained, continuous use of the equipment in any operating environment. Tyre damage does not cause delays or stoppages
• Damage resistance and all-terrain utility: Abrasion and cuts do not affect structural properties and stability of the tyre, thus offering a high degree of failure-resistance in severe service conditions
• Stability: The added weight augments balance and ballast properties. This provides stability when negotiating gradients and uneven terrain
• Ease of installation: Semi-solid tyres are supplied as ready to fit tyre and wheel assemblys. No special mounting equipment is required and the entire assembly can be hand mounted in a few minutes
• Inventory management: Fewer replacements mean that costs associated with re-purchase, downtime, inventory and repair are significantly reduced.

Ideation to implementation
Trident has developed application-specific, outcome-orientated products and solutions to assist machine owners and operators get the best out of their equipment in the most demanding conditions. Trident?s products are distributed in over 25 countries in the Americas, Europe, Africa, the Middle East and Asia-Pacific.

For further information, visit: www.trident-intl.com